SpeedMixer™ USA - Home  
Below Header
 


UK Site Irish Site Swedish Site Other Countries German Site
A National and International service supplying the
FlackTek™ SpeedMixer™
Supporting a full range of Mixing and Dispensing Products.

 


No Adobe Flash player

Cartridge and syringe mixing

 

Dual Asymmetric Centrifugal Laboratory Mixer System Animation

Dual Asymmetric Centrifugal Laboratory Mixer System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DAC 1100.1 FVZ

The SpeedMixer™ DAC 1100 FVZ is a laboratory-sized instrument for the rapid mixing and grinding of materials that would otherwise require large amounts of time and / or effort to mix and / or grind.


DAC 1100.1 FVZ

Technical data:

Speed: Variable 800-1600 rpm
Mixing time: 5 seconds to 10 minutes
Mixing capacity: 800g to 1000g
Location dependent – voltage / frequency
110V 60Hz or 230V 50 Hz
Power consumption: 1500 W
Facilities:

Viewing Window, Tachometer, Cooling Fan
Large Volume Basket (1300 cc container)
Touch screen designed with
20 possible mixing programs
Windows Keypad, RS232 interface
color matching mode

Dimensions:

Width: 440 mm
Depth: 640 mm
Height: 640 mm / 950 mm lid open
Weight: approximately 86 kg

How does it work?

The SpeedMixer DAC 1100 FV(Z) works by the spinning of a high speed mixing arm in one direction while the basket rotates in the opposite direction (thus, the name - Dual Asymmetric Centrifuge). This combination of forces in different planes enables incredibly fast mixing, and yet the precision construction of each machine gives it a balance that allows amazingly quiet operation.

What can it do?

With this instrument, the typical mixing time for fully dispersing a colour paste in a silicone sealant is less than 10 seconds; for mixing fumed silica or precipitated chalk silicone formulations 8 - 14 seconds will normally suffice. These are both operations that would otherwise require up to 3 hours or more of mixing time, and they can only be done in quantities of 1 quart or greater. Mixing does not incorporate any air and additional mixing time removes air from the blend, yielding a finished product when the mixing process is done. Fluids of widely differing viscosities can be blended quickly.

What materials can it mix?

The SpeedMixer DAC 1100 FVZ is useful for 1 and 2 part silicones, polyurethanes, polysulfides, acrylics and a wide range of other materials. There are certainly a great number of products not included in this list that can benefit from the use of the SpeedMixer technology. With disposable cups, there is no worry about contamination in colour master batches, pharmaceutical products, or other sensitive materials, since the DAC 1100 FVZ has no mixing components to clean. Both re-usable and less expensive disposable cups (recommended especially where cross-contamination is a problem) are available. The Speed Mixer DAC 1100 FVZ also allows the use of higher filler loadings than conventional mixers, e.g., 25% or more of fumed silica into a silicone!

How much can it mix?

The maximum batch weight that can be mixed is 1000 grams, (1100g total, including the mixing cup, lid, and holder). Cups are used with holders that have weights designed to maintain the balance of the machine. Various cup sizes are available (Max 300, Max 200) to meet your needs and minimize material waste by tailoring the actual batch size to the quantity you need, not what the mixer requires. For smaller sample quantities from 5g to 100g - the DAC 150 FV(Z) is available.

Where is this instrument used?

The main current applications are for lab screening of development formulations and formulation components, for QA testing, and for small volume production. With the incredible speed of mixing the bottleneck now becomes the weighing operation, not the mixing. This makes every SpeedMixer™ user a better compounder, since it allows the mixing of many iterations that would otherwise go untested due to time constraints. The SpeedMixer DAC 1100 FVZ has proven itself extremely useful for tests involving cure rates, couloirs, and appearance, as well as the measurement of basic physical properties. This permits the screening of numerous formulations before the next phase of development scale-up. SpeedMixer technology involves using the proper size cup for each mixture to be run. Contact us for recommendations on the products to be used.

How do I control the instrument speed to avoid damage to my product?

Especially designed for research and development and quality control work, the DAC 1100 FVZ has variable speeds (500 – 2,150 rpm, set by the revolution rate) and a window for viewing the mixing basket, allowing more in-depth research work to be done. The speed is adjustable. Fixed speeds can be set using the keyboard and by-pass the speed control dial - in order to carry out a series of batches at a desired speed. Using lower speeds can help avoid some of the effects of the tremendous centrifugal forces generated at top speed, e.g., the build-up of frictional heat in sensitive mixes, or the potential damage to micro environments.

Who is Hauschild?

Hauschild is one of the major European dental supply houses, based in Germany. The SpeedMixer technology was originally developed for the quick mixing of dental impression materials and other dental compounds.

For further product information,

Email: SpeedMixer@FlackTek.net or please contact us online

 

Technical data:

Speed: Variable 800-1600 rpm
Mixing time: 5 seconds to 10 minutes
Mixing capacity: 800g to 1000g
Location dependent – voltage / frequency
110V 60Hz or 230V 50 Hz
Power consumption: 1500 W
Facilities:

Viewing Window, Tachometer, Cooling Fan
Large Volume Basket (1300 cc container)
Touch screen designed with
20 possible mixing programs
Windows Keypad, RS232 interface
color matching mode

Dimensions:

Width: 440 mm
Depth: 640 mm
Height: 640 mm / 950 mm
Weight: approximately 86 kg